Make: Massey Ferguson
Model: MF1150
System: PRESSURE COMPENSATING

ACE PUMP CORPORATION
P.O. Box 13187
1650 Channel Avenue
Memphis, TN 38113
Phone: (901) 948-8514
Fax: (901) 774-6147
Pump Model#
FMC-HYD-204
Port Sizes
1-1/4 X 1
Max Flow:
 90 GPM
Maximum Shutoff
Pressure:
100 PSI
Pump Model#
FMC-150-HYD-206
Port Sizes
1-1/2 X 1-1/4
Max Flow:
 120 GPM
Maximum Shutoff
Pressure:
120 PSI
Pump Model#
FMC-200-HYD-210/304
Port Sizes
2 X 1-1/2
Max Flow:
 200 GPM
Maximum Shutoff
Pressure:
80 PSI(210)/120 PSI(304)



Installation Instruction for PRESSURE COMPENSATING System

1. Install the RESTRICTOR ORIFICE on the intake port of the ACE motor.
2. Close the needle valve on the ACE motor by loosening the jam nut and screwing the needle valve in a clockwise direction all the way in. Tighten the jam nut.
3. Move the Rabbit/Turtle control to the rabbit position.
4. Move hydraulic lever to the "Lower/Retract" position to start pump.
5. Open the sprayer agitation valve and adjust Rabbit/Turtle flow control to get desired spraying pressure.